Add that low end torque and more speed you have been looking for!

This will replace the clutch and jackshaft with an engineered torqued converter and riser plate.

The torque converter comes with a 10 tooth sprocket for your 420 chain and has everything needed for installation.

The riser plate has slotted holes in the bottom to get the chain aligned to the rear sprocket. We often have to move the engine to the left side of the bike about 3/8″.

You must use a header and air filter kit with this as the raised engine will have the muffler and airbox contact the frame. Use OMB part number 1755112 for the Stage 2 kit that includes the non-EPA carb that offers additional tuning and an easily changed main jet.